| |
|
Self-Amalgamates
Insulating
Tapes
[Self-Fusion (Self-Amalgamates) Type] Butyl Rubber
Adhesive
Protection for Power,
Communication Cable Wire & Joint.
|
|
|
|
|
|
Contents:
Product Introduction,
Self-Fusion
(Self-Amalgamates) Properties,
Relative
Products,
Application Photo
|
|
|
Product
Range |
Total
Thickness |
Backing Material
|
Adhesive System |
Release Liner |
Standard
Color |
|
| |
| |
H-520 |
0.5 mm |
LDPE
Film (0.12mm) |
Self-Fusion
Butyl
Rubber (0.38mm) |
Non |
Black |
|
| |
| |
B-120 |
1.0 mm |
Non |
Self-Fusion
Butyl
Rubber |
Yes |
Black |
|
| |
| |
VC-140 |
1.0 mm |
Vulcanized Rubber |
-ditto- |
Yes |
Black |
|
| |
| |
EL
05
Flame Retardant |
2.0 mm |
EPDM
Rubber |
-ditto- |
Yes |
Black |
|
| |
| |
Harness |
1.0 mm |
Non |
-ditto- |
Yes |
Black |
|
| |
** The information contained herein is subject to
change without notice. Furuto shall not be liable
for technical or editorial error or omissions. |
| |
 |
|
|
Product Introduction
| |
Furuto's
Self-Fusion (Self-Amalgamates) Insulating Tapes are
mainly designed for Power and Communication Cable
splicing and terminating, it's provides excellent
electrical properties, whatherability, resistance to
water and humidity and offers a wide range of
application possibilities.
(Approved by Tokyo Electric Power Company "6Y-23"
Standards)
(Approved by Taiwan Power Company "A023-3.3.3."
Standards)
Salient Feature
1. Excellent Self-Fusion (Self-Amalgamates) property, Easy to use.
2. Excellent electrical properties: High Volume
Resistivity, Breakdown
Voltage, Low Dielectric Loss Tangent...etc.
3. Excellent resistance to Water, Moisture,
Humidity, Ozone and
Chemicals.
Main Application
For terminating, splicing and corrosion-proof wires,
cables and joints.
For Water-Proof covering for Power, Marine and other
cable wires requiring water and moisture proof-ness.
For corona-resisting insulating of high voltage
cables.
For insulating, covering and protection of plastic
cable and wires.
. TOP
Product Range... |
|
|
Self-Fusion
(Self-Amalgamates) Properties
| |
|
|
| |
Above
picture (ref. Product No: H-520, B-120, VC-140)
LEFT:
The Self-Fusion (Self-Amalgamating) Tape apply to
the pipe in
the beginning, you can
see the "GAP" (red color area) between
each layer.
RIGHT: After
applied 48hrs (25 degree C), The "GAP" between each
layer has
been Self-Fusion (Self-Amalgamating) itself and
offer the excellent
Anti-Corrosion and Insulating properties.
|
|
| |
TOP
|
|
| |
![Application Model: [Self-Fusion (Self-Amalgamates) Type Adhesive Tape] & Traditional PVC Pipe Wrapping Tape](images_JF/Self-Fusion_2.jpg)
|
|
| |
Above
picture (Application Model)
(ref. Product No: H-520, B-120, VC-140)
LEFT:
Outside appearance of HK520 PE Insulating Tape.
[Self-Fusion (Self-Amalgamates) Type Adhesive]
RIGHT: Outside appearance of Soft PVC Insulating Tape.
[Traditional Solvent Rubber Adhesive]
|
|
| |
TOP
Product Range...
|
|
| |
![Application Model: The difference between [Self-Fusion (Self-Amalgamates) Type Adhesive Tape] & Traditional PVC Pipe Wrapping Tape](images_JF/Self-Fusion_3.jpg)
|
|
| |
Above
picture (Application Model)
LEFT:
Inside appearance of H-520 PE Insulating Tape.
[Self-Fusion (Self-Amalgamates) Type Adhesive]
After
applied 48hrs (25 degree C), The "GAP" between each
layer has been
Self-Fusion (Self-Amalgamating) and offer the
excellent
Insulating and Anti-Corrosion properties.
The user will be save a
lot of expanse for the pipeline
maintenance year to year.
RIGHT: Inside appearance of Soft PVC Insulating Tape.
[Traditional Solvent
Rubber Adhesive]
After
applied 48hrs (25 degree C), The "GAP" between each
layer STILL had the GAP
forever, the Corrosion will be starting
from the GAP area day by
day.
The user have to spend a
lot of expanse for the pipeline
maintenance year to year.
|
|
| |
TOP
|
|
| |
|
|
|
|
|
|
|
Application Photo:
(H-520, B-120, VC-140)
|
|
|
|
Product Link:
H-520,
B-120,
VC-140,
Sealing for Harness,
Relative Products:
Water-proof Tapes,
Water-Proof
Sealant,
|
|
. |
TOP |
|
|
|
